La machine de soudage bout à bout par cisaillement est utilisée pour connecter les bandes après avoir coupé l’extrémité arrière de la bobine précédente et l’extrémité supérieure de la bobine suivante.

1. Adoptez la technologie de cisaillement avancée, coupant la bouche en douceur sans bavure;
2. Air hydraulique / comprimé comme puissance, facile à travailler;
3. La plaque est serrée et la coupe est contrôlée par la pédale de commande;
4. Le soudage TIG à électrode de tungstène est adopté, le cordon de soudure est plat et petit, sans meulage, et la résistance de la bande soudée est élevée;
5. Automatisation du processus de soudage

1. Slant cutting is adopted. Two upper knives are fixed on the upper knife seat, the upper knife seat is connected with the rack through bolts, and the lower knife is installed on the mobile bracket, and the lower knife bracket has the oil cylinder/cylinder to move up and down.
2. Clamp, position and install on the upper part of the frame.Align the two welding strips and clamp them tightly.Clamping positioning is divided into two parts, left and right, respectively two by foot switch control cylinder/cylinder action
3. The left and right strips to be connected are clamped in the middle of the copper plate electrode plate by the clamping device. The welding gun is fixed on the moving slider, and the reciprocating operation is driven by the lead screw.
4. Motor drive is driven by screw, motor speed is adjusted by the display input servo output frequency, adjust the welding torch speed.
5. Left and right pressure indicator light is on for pressure, light is off for release
6. Left and right pressing device is controlled by foot switch, each step, the left and right pressing device changes once.
7. Shear foot switch in the middle, step down the lower knife upward shear, release the lower knife to return.
8. Adjustment mode;Make the welding torch arc at the edge of the strip 1-2.5mm and arc at the edge of the strip 0.5-4mm.
9. Electric button, with two contact points of welding torch forward and back, can adjust the position of welding torch manually.

Défilement vers le haut → Déroulement → Cisaillement et soudage → Accumulateur en spirale → Formage → Soudage par induction H.F. → Élimination des bavures externes → Refroidissement → Dimensionnement → Scie volante → Table de sortie → Inspection → Emballage → Entrepôt